| Gate Valves
Resilient seated, non-rising stem (AWWA C509) cast iron body coated with fusion bonded epoxy-resin, meets AWWA C550. Flanged connections, mechanical and push-on Tyton joints, Tapping and Post Indicator valves. Available with 2" operating nut or hand wheel.
Manufactured by: American AVK, Stockham
|
|
Check Valves
Resilient seated, fusion bonded epoxy coated iron body, meets AWWA C508. Flanged connections with options of outside weight lever or spring and lever.
Manufactured by: Matco, American AVK
|
| Hydrants
High pressure dry and wet barrel hydrants, meets or exceeds ANSI/AWWA C502. Flanged mechanical joint or push-on base. 5-1/4" main opening. Bury depths from 1-1/2 feet to 12-1/2 feet, in 6-inch increments. 4-inch or 4-1/4-inch pumper nozzle.
Manufactured by: AVK
|
|
| Fittings
AWWA C-110 ductile and cast iron flanged fittings, AWWA C-153 ductile iron mechanical joint, restraint, accessories and push-on fittings to be used with ductile iron pipe and PVC C-900. SDR35 PVC gravity sewer fittings.
|
|
|
|
|
|
| CONTROL VALVES
Automatic control valves--widely used in waterworks distribution systems, such as pressure regulator, relief valves, level control, float valves, etc. Air release and combination air & vacuum valves.
Manufactured by: Cla-Val, Watts, Val-Matic, Bermad, Apco
|
|
|
|
|
|
| TAPPING SLEEVES & REPAIR COUPLINGS
Tapping sleeves, used in tapping into existing pipelines including ductile iron, PVC, steel, asbestos cement, etc. Repair couplings include straight and/or same material piping, transition from one type of pipe to another, such as ductile iron to steel pipe, rubber couplings.
Manufactured by: JCM, Powerseal, Smith-Blair, Romac, APAC, Dresser
|
|
|
|
|
|
| SERVICE MATERIALS
Service saddles, service fittings, meter setting products, curb and corp stops, compression (pack joint) or threaded connections.
Manufactured by: James Jones, AY McDonald, JCM, Powerseal, APAC, Dresser.
|
|
|
|
| BACKFLOW PREVENTION DEVICES
Backflow preventer is a device used in preventing the reverse flow of a liquid into the potable water supply. By installing this device, it will protect the water supply from any contamination , which can pose a very serious problem.
Manufactured by: Watts, Ames, Wilkins, Febco.
|
|
|
|
|
| UTILITY & VALVE BOXES
Concrete boxes are commonly used in isolating water meters and shut-off valves for future access to the meters or the valves. Variety of lids and covers are available for these boxes.
Manufactured by: Christy, Carson
|
|
|
| METERS
Water meters are now widely used in commercial and residential. From Positive Displacement to Compound meters with different choice of reading method such as direct reading, remote registers, and even radio technologies.
Manufactured by: Performance Meter
|
|
|
|
|
| TOOLS & TEST EQUIPMENT
Pipe tools and threading equipment, valve wrenches (keys), test plugs pipe-locating devices, hydrant flushing equipments.
Manufacturers: Perfecto Products, Wheeler Pilot, Cherne , Fisher Locators, Mars, etc.
|
|
 |
| 88 |
|
| SAMPLING STATIONS
Manufactured by : Kupferle
SERVICE TUBING
Type K soft copper tubing, Polyethylene service tubing (Iron Pipe Size or Copper Tube Size).
MISCELLANEOUS
Cast Iron Spools, Cast Iron Manhole Frames & Covers, Grates & Boxes, etc.
|
 |
| 88-1 |
|
|
 |
| 88-2 |
|
|
 |
| Performance Compound Meter |
|
|
|
